U.S. AirForce is looking for old storage Media (CF or PC cards)
86 points - today at 3:35 PM
SourceComments
The much more problematic ones to find a replacement for in 2026 are the so-called "linear" memory-mapped cards, consisting of one or more banks of raw parallel NOR flash with no controller IC. Linear cards were never standardized and the protocol used to interface to parallel flash can vary greatly across chip families, so the vast majority of devices that use them are hardcoded to only accept cards with a specific manufacturer and device ID. Many NOR flash manufacturers from the turn of the century have long discontinued their products and emulating parallel flash using modern FPGAs and microcontrollers is also non-trivial due to their memory-mapped nature, so owners of legacy telecom equipment and original Dance Dance Revolution arcade cabinets [1] are left with pretty much no viable replacement option once the stock cards fail.
[1] https://psx-spx.consoledev.net/konamisystem573/#flash-chips-...
A fun story: Our cards had whatever industrial-spec microSD card we could find (16GB, 32GB, etc.), and we'd internally limit the disk size to whatever the platform needed. Almost every aircraft had some specific number of MB they wanted because all of their CONOPS listed it, and they didn't want to update documentation or software to put a different number there. We had a plane that could only use EXACTLY 128MB, but they were currently using 256MB cards and partitioning them to 128MB. We updated the disk size to present as 128MB so they could skip this step, and they specifically told us to put it back to 256MB because they didn't want to update the commissioning process to remove the partitioning step.
It was rewarding work, and the card we designed was cheap (~$500 each, which is literally nothing for major platforms like this) and 100% US-designed and made (with the exception of ICs manufactured in the usual places). Still, the procedural and cultural practices of these program offices made it a real struggle to get traction and deploy them widely. Government acquisition is just generally designed around funding primes for current development and then paying through the nose for sustainment later. It was hard to design something for widespread sustainment use because by the time you were done and ready for production, a bunch of parts would be obsolete. Then you'd have to rev the design over and over. We were never allowed to stockpile anything, even if it was trivially cheap, to facilitate production later.
This is more of a survey to identify _potential_ suppliers of NEW CF/PC memory cards. It's not a request for bids, nor asking civilians to root around their junk drawers for cards to send off to the military.
Reading between the lines, they are likely evaluating multiple options for modernizing whatever F-22 system this is, and need to find out if going this route is even feasible.
All current US military aircraft (at least up through the F-35) use CF cards to take mission planning from the laptops in the SCIF (or whatever unclass space they are using) to the aircraft.
As an aside, LCACs (among other platforms) also use these systems and cards. So this is a pretty widespread use case.
The company that I do recommend for any industrial flash is Delkin Devices (https://www.delkindevices.com/). They are based out of San Diego, CA and I bought USB 3.0 high endurance drives from them and so far the performance of those have been solid, and it's lasted me many cycles. These are whom you'd be in contact with, for bids like these.
It's worth expanding the supply chain options locally. If anyone needs this they'd have to get Micron or Sandisk to make and assemble them into other form factors. This part is what is harder than it looks, and would need to be done.
One extra layer, but the chips are commodity.
With glue, should be able to meet environmentals, shock and vibe etc