Ford and GM have been doing this since 2002 with the GM–Ford 6-speed automatic transmission [0]. The companies worked together on the design and ultimately worked with Allison Transmission on its manufacture.
One key difference between each company's implementation had to do with the shifting solenoids and the electronics. But as far as I know the actual clutch pads and gearing were the same.
Makes sense, it's probably the only way they can actually compete with Chinese car manufacturers.
I feel like the title is misleading on the impact, it's actually all of the big players
> The push to simplify and lower costs comes as Japan’s seven automakers, including Toyota, Nissan, Honda, Mazda, Subaru, Mitsubishi, and Suzuki, work to fend off the increasingly competitive list of Chinese automaker
steveBK123today at 2:00 PM
I wonder if this is also a low cost shadow bailout for Nissan, the junior partner. They have been in financial troubles for a long time, escalating recently.
Honda almost got forced into acquiring them by the government and then managed to get out of it. There was a very funny press conference where press asked the CEO of Honda why they would buy Nissan and the guy said something like "That is a difficult question".
user20180120today at 5:07 AM
This will not matter when people have no jobs. How are the people without jobs/incomes going to pay for all of these cars and fuel?
WorldPeastoday at 5:17 AM
Detroit tried something like this as well, mostly under the USCAR/USAMP umbrella when Japanese competition knocked them off their stools, here's some reading if you're interested:
I feel like they're getting pinched from both the inexpensive manufacturers from China and higher end models/manufacturers as well (BYD, Tesla, etc...).
altairprimetoday at 7:22 PM
Subaru and Toyota already share a lot of parts effectively, but only for one model of car (whose Toyota logo is made by Subaru and whose ECU is Toyota’s). So it’ll be nice to see them deepen that interaction with other manufacturers as well.
pmkarytoday at 4:38 AM
It's interesting how optimization will eventually make everything exactly the same. And it is just starting.
delichontoday at 4:10 PM
This YouTube video describes how standardized parts created large resistance to the new 48V architecture, which is projected to bring large gains in efficiency. It required a company that is largely their own supply chain to bypass the chicken versus egg problem.
> Japan’s three largest automakers have agreed to begin standardizing vehicle parts in an effort to reduce costs
Semi Related to the topic.
Nissan and Honda are not the biggest Japanese car makers anymore. [0]
In Last Japanese financial year (April 25 to Mar 26), the total sales of Nissan and Honda were so bad that Suzuki has now leapfrogged them both to become the second biggest Japanese car seller internationally after Toyota.
The sales drop for Nissan and Honda is mainly due to steep declines in China. Suzuki already left Chinese market in 2018 so it was not affected.
Why I should care about cheaper cars, if my current car (Venza 2023 Limited) only support turn by turn navigation if you using Venza navigation but not for Google Map or Waze? And the issue is only in permissions? Why Toyota cannot make it works with 3rd party applications? They deliberately decided to make car less usable and after that amazed that not enough people want to buy it?
meet_zaveritoday at 4:35 PM
Here in india, toyota and suzuki are already building cars with shared partnership. For example, see Suzuki Fronx and Toyota Taisor difference (both are built by suzuki).
Some of the models, are completely built by one brand while , another sells it under different name with some cosmetic changes. The brands keep their unique/marquee models to their own, while outsource the other ones (which are not marquee).
ctrlaltdileeptoday at 2:27 PM
I think long term standardization will be good for consumers in the long term but I wonder how it will impact workers? On one hand I'm sure it will improve their ability to change jobs since installing the same part would carry over the brands. However, I wonder if it will reduce their ability to command a competitive salary since there will be a lot more people who know how to work with the same parts in the pool.
dan_grectoday at 4:36 AM
I’m shocked this has not happened sooner, and I suspect US automakers will have to do the same if they hope to survive.
odiroottoday at 2:25 PM
Would be nice if the Japanese big 4 did the same for motorcycles. Even simple bolts and washers are crazy overpriced in this segment.
hn_submittoday at 7:20 PM
I've predicted that we'll see a large degree of standardization of components in EVs like electric motors, motor controllers, chargers and battery packs. There's even a fair chance the standards for these components will freely licensed, like open-source software.
And we need something similar for e-bikes and e-scooters, where manufacturers are still rolling their own everything, just like we had with mobile phone chargers before the EU mandated USB connectors. As a society we need interchangeable parts available through freely available standards.
profsummergigtoday at 9:33 AM
A non-OEM part for my Toyota is $50 on Amazon. I had to buy it local (because the car was already in the shop and we couldn't wait for Amazon to deliver it) from NAPA, it was $500.
Seems like there's plenty of headroom here.
giancarlostorotoday at 3:43 PM
Good my 2011 Toyota Venza needed both junction boxes replaced, its niche to just my make and model, so I couldnt find any compatible parts from other cars. Frustrating.
heisenbittoday at 10:34 AM
The combined effect of focusing on assembly, outsourcing subsystems while needing to differentiate themselves leads to suppliers having more power. This worked while to volumes were high and predictable. Standardization is helping here now, especially while the future volume of any new product is still uncertain.
speedylighttoday at 8:05 AM
If Chinese EVs weren’t being suffocated by import bans and ridiculous tariffs in Europe and the U.S. these companies would absolutely be decimated. I watched a review today of a China made EV by Mrwhosetheboss and it’s absolutely insane how far ahead those cars are compared to the overpriced garbage coming out from the rest of the world.
strategy_prospetoday at 5:26 PM
Makes sense considering none of their parts really drive any unique value, but among differentiation the systems to assemble the vehicles will drive differentiation if any.
The AUTO industry is a lesson that value with firms only lasts while technologies are still standardizing.
In the future, consolidations will occur, and one or two firms will supply Cars for AV firms, which in turn will run their own D2C shops while also being available on Uber.
233mhztoday at 9:15 AM
Should have been done for decades, most car parts are basically solved, there is nothing less efficient than dozen of companies literally reinventing one by one, wasting millions to basically reach the same conclusions.
Synaesthesiatoday at 8:29 AM
It's about economies of scale. If you're going to make expensive tools for parts, the more parts you can make from that tool, the better for your bottom line. That's the huge advantage Chinese companies have.
pknerdtoday at 8:09 AM
Not sure about other countries but in Pakistan, they are scammers, their local assembly plans produce 3rd rate cars, demand tons of money in return. The Chinese names like BYD and MG are taking the market share. I am glad
a1371today at 5:42 AM
My gym commute time is half an hour by subway and 20 minutes with car. Today I thought to use car to shave that 10 minutes off. Bad mistake.
First, a driver was about to turn as I was catching the end of a greenlight... Let's just say I'm grateful to be in one piece.
Then, the navigation got me stuck in traffic for a train crossing. The train must have been 200 cars. I lost count. As I'm sitting there missing reading my ebook on the subway, I look around at the cars. A blue Kia hatchback with the new logo, a Mitsubishi, a few Toyotas, Hyundais.
I can't help but think these brands are already relics.
A trend under everyone's nose is public transportation, and non-car travel modes, have only gotten better. For the rest, you'll have public and private vehicles that drive you, there's car share, and what remains is a much smaller rural market.
What does each of these companies have, to respond to that? Shortages and cost overruns it seems, and not much else. Nokia was a household brand until it wasn't.
It's hard to imagine Toyota having that faith. The rest, I reckon many will fall. Don't you think?
nokeyatoday at 10:47 AM
Standardised parts will be cheaper for manufacturers, but will it actually make cars cheaper for the buyers?.. That is the question.
zeristortoday at 9:52 AM
I was going to make a remark about Unipart, the spare parts company from British Leyland.
Remarkably they seem to be a British industrial success, and I’m impressed.
skyberrystoday at 5:21 AM
I could see this eventually making things easier for repair shops, instead of managing different parts for all the brands it's less complexity.
The part about keeping consistent color coding in the wires relives a mental load for repair.
hk1337today at 10:20 AM
Does this include Lexus, Infiniti, and Acura?
rantignotoday at 5:44 AM
Cars might end up pretty boring, all the same features and parts. Kind of like what happened with smartphones.
On the bright side, maintenance and repairs should become much simpler.
salman10today at 8:27 AM
This is quite sad to see - as parts standardize so do customizations. The Iran war has taken its toll.
drnick1today at 4:51 AM
Perhaps the next cost saving measure should be to remove the cellular modem that nobody asked for and that shamelessly spies on drivers. Unless, of course, Toyota et al. do in fact get a kickback from dealers, insurance companies, and data brokers for invading their customers' privacy. In some of the cars these companies make, you need to either pull a fuse (best case) or take the dash apart to unplug the unwanted "bug."
PeterStuertoday at 5:57 PM
"The automakers will start with equalized quality criteria for steel, consistent protocols for plastics, and a universal color-coding scheme for wiring harnesses"
You might have been worried about stifeling innovation.
, but this does not seem to be it.
rolandogtoday at 4:03 PM
Are there any indications whether they're willing to be a privacy-first company? I can't imagine buying a very expensive transportation method that betrays me by literally spying on me, my loved ones' or my guests' conversations. Imagine not being able to fart without BigTech weighing whether they should show me some indigestion medication ad.
YesThatTom2today at 3:30 PM
Silly Japanese! Everyone knows the way to lower cost is to lay off people and give big raises to the executives.
But seriously… this is impressive and smart. It’s following the Theory of Constraints way of reducing costs. It’s “the hard way” that will have long term benefits.
nelsonictoday at 4:14 PM
Took them long enough to read the tea leaves … let’s hope they can survive. Our family has always had at least one Japanese car. Several Chinese EVs in the extended family now. They are very much taking over.
mattlondontoday at 8:46 AM
In the UK Honda has just one EV with a range of 110 miles, after they discontinued their previous effort that had huge interest and hype (Honda E) yet they only gave it a similar range of approx 105 miles IIRC and so obviously no one bought them and it was quietly cancelled. I know let's repeat the same mistake!!!
At least Toyota have a range of more sensible EVs now in the UK, but they seem to be squarely aiming at the large (i.e. expensive ... Tesla Y, BMW x1 prices for example) SUV market where you're never going to compete to more premium brands in a Toyota (this is why they invented Lexus after all). Where is the 250 mile range EV Corolla or Prius for example?
Curious how it plays out for nissan given they're already just reading Renaults.
I used to only buy Hondas and Toyotas in the old days but now I've switched to other brands because they sell EVs that are usable.
kennywinkertoday at 4:52 AM
Think of this the next time someone tells you competition is good for consumers… sounds they could have brought down prices at any time, if they’d cooperated, hey?
whatever1today at 4:15 PM
All the car companies (German, American, Japanese) helped China build their supply chain of car components.
Now they are shocked that they can assemble the components and slap a different logo ?
zoobabtoday at 12:52 PM
"standardize" i bet there is no "standard", no datasheet, no published spec.
freeopiniontoday at 2:25 PM
Imagine if they standardized their own parts so much that you could take a Honda range extender and drop it into a Toyota Corolla or Nissan Altima without adapting bolt patterns, wiring harnesses, etc. The only adapter you would need is the fuel supply neck.
This is not the kind of standardization they are considering. But why stop at fuel pumps and O2 sensors? Oh wait, they aren't even starting there. They are going to standardize the color scheme for wiring harnesses?
Part standardization is obviously much more complex and difficult than just thinking it is a good idea. I remember reading about Prusa using x-ray and other detection mechanisms for quality control of parts from outside vendors. It sounded like a bit of a headache for something as simple as a 3D printer part, let alone a car part.
itomatotoday at 9:44 AM
Production methodologies and themes will be the differentiator?
Hoshin Kanri vs TPS
diggernettoday at 4:56 AM
Cool. Can we have standardized, easily replaced "infotainment" systems back now?
jordanbtoday at 4:35 AM
Basically Kia/Hyundai then
simonebrunozzitoday at 7:50 AM
They made a bet on hydrogen, which was stupid, and they made a specific type of bet on hybrid, which was somewhat successful, but they never went all-in on that.
They are also quite behind on car software, like the Germans.
bryan_wtoday at 4:32 PM
This is a good answer to the issue of Chinese cars. I wouldn't buy an EV by the Floughi or Gneenys out there because while the rotating seats are impressive, after 5 years of kids beating them up, I doubt the company will still be around to ship a replacement motor or bracket.
So many moving parts that can break in the cars today
theyograjthakurtoday at 3:00 PM
Nice , Let's see how it goes
binsquaretoday at 5:29 AM
Would these lower costs translate to repairs as well?
I hope so
deboulaymxftoday at 11:13 AM
Return of the keiretsu
tristortoday at 2:52 PM
This is definitely a boon for Nissan. Toyota and Honda already make very reliable vehicles where the vast majority of parts experience minimal to no failures over a service life, and both manufacturers design to make maintenance if not easy, at least tolerable. Nissan is a shitshow by comparison in 2026, so let's hope it brings up their quality as I would expect.
deletedtoday at 6:17 AM
0xbadcafebeetoday at 6:29 AM
So the question then is, why didn't they do this years ago? The answer is, they didn't need to, because they knew that you would spend a lot of money on a car. A captive market keeps prices high.
iJohnDoetoday at 4:50 AM
Should have done it decades ago. About damn time.
stego-techtoday at 12:22 PM
Not gonna lie, this is exciting news. Standardizing on parts and differentiating on assembly or priorities (Nissan on cost, Toyota on reliability, Honda on balancing the two) is a smart strategy for XDMs going forward as competition shifts from company v company and back to market v market.
tjohnelltoday at 4:41 AM
What about Mazda??
nromiuntoday at 7:20 AM
I think they are talking about engine and metal parts. Because a lot of other parts of a car is already standardized and manufactured by other companies.
luxuryballstoday at 5:14 AM
Notable also in that historically Japanese automakers were renown for all of the advantages they due to intentionally avoiding this kind of thing.
kyleeetoday at 4:29 AM
Smart, hopefully a trend between even more auto makers
gitowiectoday at 12:26 PM
Enshitification-maxing!
burnt-resistortoday at 6:53 AM
So... another Nippon Denso but fewer bespoke parts.
1970-01-01today at 2:25 PM
OEM is not always better! This isn't going to solve the problem. What needs to happen is a standardized method for vetting genuine OEM parts, otherwise China will just make knockoffs of the standardized part! Identifying fake/non-genuine parts from China is the real problem to solve. Once people have a guaranteed good part, the manufacturers of these parts can lower their costs.
bvanheutoday at 4:44 AM
I've always wondered why there are still 5-6 different window cleaner (i.e. Windex and equivalent). I would have thought we have figured the best product to clean window by now.
I guess it applies to car as well.
yuhao2daitoday at 6:55 AM
here comes the age of Japanese slop. make parts cheaper and work worse to keep margin.
worked with all of these manufacturers in Japan and the way they treat the suppliers the truck drivers tells you all you have to know about these brands and Japanese automobiles in a nutshell.